Armor Specification

Facilities
November 29, 2016
Mercedes G63 AMG 6X6
Mercedes G63 AMG 6X6
November 29, 2016

Ballistics Chart

While NCE Ballistics Chart incorporate as much lightweight armor as possible,
high-hardened ballistic steel is still applicable in certain areas of the vehicle.
All steel incorporated into the armoring process is milled using a special chemical composition
that ensures ballistic integrity and maximizes Brinell hardness.
Mega constantly striving to upgrade our technology to provide better protection and
quality while adding as little weight as possible to the vehicle. Mega works closely with industry giants on new armoring technologies.

The European standards EN 1522 / EN 1063 specified 7 levels of protection: B1 to B7.
A lot of confusion exists because of the introduction of the new standards.
The point is that the most popular protection class for civil vehicles –
B6 became VPAM 7 and another widespread protection class – B7 – became VPAM 9.
Сlass B1 and B2 are rarely used in armoring a security vehicle.
Class B2 can withstand a 9 mm,. 38 of special and lesser rounds what will lead to slowing down bullets from weapons of larger calibers.
Class B3 can withstand .357 Magnum rounds or lesser threats,
and Class B4 can withstand a.44 Magnum rounds or lesser threats.
The scale starts separating at this point. B5 is capable of withstanding a .

Chart info:

357 Magnum at 5 meters and B6 7,62 x 39 rounds from Kalashnikov rifle.
Starting from B6 which is a relatively high level of security and above the armor is designed to stop some serious threats such as threats ranging from 7.62х51 (.308) up to 30.06 AP (Armor Piercing) and Penetrator rounds. Some sedans are rated at B4 or B5 protection level which can provide adequate protection against certain threats. Usually security vehicles such as SUV’s are armored for different reasons like being a police car or ambulance and can provide a B5, B6 or B7 level of protection. For example, police type trucks are often designed to defeat .50 caliber rounds. Concerning vehicles with B5, B6, B7 level of protection – they are very resistant to explosions, for example our Aurum Security vehicles which are designed to defeat such threats as road side and suicide bombs.
The correspondence of these levels to the 7 levels of EN 1522 / EN 1063 is shown in the table below:

Ballistics Chart

ISO Certifications & GSA Certification

ISO Certifications

ISO Certifications

Certifications:

ISO Certifications proved,composite materials are traditionally regarded as materials that can save energy in large structures associated with transport. They are used to produce lightweight structures for fuel-efficient aircraft such as the new Boeing 787 Dreamliner; lightweight cars from Lotus, Ferrari and TVR; and high-speed trains, speedboats, and racing yachts. Now, however, some of the most interesting applications of composites are those where the materials are used to save lives and protect property by absorbing the energy of projectiles, impacts, and crashes.
TAG is a GSA contract holder.

 Department of Defense
TAG and DC have knowledge, skills and financial backing to take on even the largest of military contracts.

ISO Certifications                                             ISO Certifications                                           ISO Certifications

H.P.White Steel Report(page No:1)          H.P. White Steel Report (Page No:2)      Steel Sample After Testing
TAG is backed by stringent quality controls, proven manufacturing systems and world-class certifications that meet the highest standards of safety. We are especially proud of our recent VPAM-BRV 2009/VR7 Ballistic ERV 2010 Blast Certification, which we received for both our Toyota Land Cruiser and our Toyota Hilux armoring solutions / ISO Certifications;

 

Glass Certification!

Glass Certification, offering true multi-hit protection.
Premium interior comes with hard-spall layer to prevent fragments/shards from penetrating the passenger
compartment in the event of an attack.  All glass certification, features excellent
ballistic protection and superior optical quality with very minimal distortion.
Composite materials are traditionally regarded as materials that can save energy
in large structures associated with transport.

H.P. White Glass Report                                           H.P. White Glass Ballistics Resistance Test                                  Glass sample
H.P.White Glass Report(Page No:1)   H.P. White Glass Report (pg. 2)    Glass Sample After Testing

They are used to produce lightweight structures for fuel-efficient aircraft such as the new Boeing 787 Dreamliner;
lightweight cars from Lotus, Ferrari and TVR; and high-speed trains, speedboats, and racing yachts.
Now, however, some of the most interesting applications of composites are those where
the materials are used to save lives and protect property by
absorbing the energy of projectiles, impacts, and crashes.

 

Steel Certification

The Steel Certification is Proved,Composite materials are traditionally regarded as materials
that can save energy in large structures associated with transport.
They are used to produce lightweight structures for fuel-efficient aircraft such as the new Boeing 787 Dreamliner;
lightweight cars from Lotus,
Ferrari and TVR;
and high-speed trains, speedboats, and racing yachts.
Now, however, some of the most interesting applications of composites
are those where the materials are used to save lives and
protect property by absorbing the energy of projectiles, impacts, and crashes.
While we incorporate as much lightweight armor as possible,
high-hardened ballistic steel is still applicable in certain areas of the vehicle.
All steel incorporated into the armoring process is milled using a special chemical
composition that ensures ballistic integrity and maximizes Brinell hardness.

Steel Certification!
H.P. White Steel Report                                            H.P. White Steel Ballistics Resistance Test                                   Steel sample
H.P.White Steel Report(Page No:1)      H.P. White Steel Report (pg. 2)     Steel Sample After Testing
Steel Certification

This 32,000-lb Cougar military vehicle has a V-shaped hull that can survive a 30-lb TNT blast,
as well as MRAP armor panels that protect the six soldiers in the cab from gunfire.
Source: U.S. Army

Steel Certification:

NCE/TAG is backed by stringent quality controls,
proven manufacturing systems and world-class
certifications that meet the highest standards of safety.
We are especially proud of our recent VPAM-BRV 2009/VR7 Ballistic ERV 2010 Blast Certification,
which we received for both our Toyota Land Cruiser and our Toyota Hilux armoring solutions.

 

Ballistics Protection

NCE will Design and Engineer Ballistics Protection with the most advance technology in the world!
The most Advanced Ballistics Protection!

Ballistics Protection!

Composite materials are traditionally regarded as materials that can
save energy in large structures associated with transport.
They are used to produce lightweight structures for fuel-efficient
aircraft such as the new Boeing 787 Dreamliner;
lightweight cars from Lotus,
Ferrari and TVR;
and high-speed trains,
speedboats,
and racing yachts.
Now, however, some of the most interesting applications of composites are those where
the materials are used to save lives and protect property by
absorbing the energy of projectiles, impacts, and crashes.

Firewall Protection

  Floor Blast ProtectionBallistics Protection

Ballistics Protection

Brake Upgrade

Ballistics ProtectionEngine Control Unit

Ballistics Protection

Replacement Hinges

Ballistics Protection

Full Door Overlaps

Ballistics Protection

 

 

 

Suspension

Ballistics Protection

Run Flats

Ballistics Protection

Battery Protection

Ballistics ProtectionFuel Tank

Ballistics Protection

Comments are closed.